Rapid Renovator

One-stage machine polishing compound for light to medium paint defects.

$52.00 / 1 Liter

Add to Order

Orders fulfilled from our Nashville warehouse. Call 615-885-9885 with questions.

Overview

A one-compound, one-pad machine solution

Rapid Renovator is a one-stage machine polishing compound built to cut and finish in a single pass, addressing light to medium paint defects without needing a separate refining step afterward.

Outstanding gloss with no refining required

In most cases the finish is ready to go straight off the machine — no second, finer polish needed to bring back the gloss.

Filler-free and bodyshop-safe

The formula is filler-free for a permanent (not temporary-looking) finish, and is silica- and silicone-free, making it safe to use in bodyshop environments where silicone contamination is a concern.

How To Use

Thoroughly clean and dry the vehicle, removing any industrial fallout or contamination from the paintwork, and strip old tar, polish, or coatings with Tar & Adhesive Remover.
Mask off swage lines, badges, delicate trim, and hard-to-reach areas with tape or film.
Apply three pea-sized dots of Rapid Renovator to a medium foam pad (a white Renovating Pad is recommended) — a fresh pad will need more product.
Working one section at a time, place the pad on the panel and start the machine at 600-800 RPM, passing over the area in a horizontal motion.
Gradually increase speed to 1500-1800 RPM, adding more product as needed until the defect is corrected.